 |
 |
 |
|
This listing is for a 1 week rental of the Colorimetry Research CR-300-RH spectroradiometer and the CR-100 colorimeter.
This special bundle provides you with both a CR-300-RH reference spectroradiometer and a CR-100 colorimeter. The CRI Utility software provided with this bundle allows both probes to be connected at the same time for fast and easy colorimeter calibration matrix creation. By using this combination of probes you can calibrate your CR100 yourself to work with any existing and emerging display technologies. You could use the CR-300-RH alone for calibration, but with this combination you can take advantage of the accuracy of the display agnostic CR-300 spectroradiometer while still also taking advantage of the incredible measurement speed and lowlight capabilities of the CR-100 colorimeter.
The CR-100 and CR300 can be used with the CRI Application for manual measurement and logging. They are also compatible with FSI’s AutoCal, LightIllusion’s LightSpace CMS*, LightIllusion’s ColourSpace*, and Portrait Display’s CalMan allowing for full 3D LUT based calibration of Flanders Scientific monitors.
*LightSpace CMS, ColourSpace, and Calman sold separately.
CR-300 Specifications
|
Detector
|
CMOS image sensor, 512 pixels
|
|
Spectral Range
|
380 - 780 nm
|
|
Spectral Bandwidth
|
2.0 nm
|
|
Spectral Accuracy
|
+- 0.3 nm
|
|
Spectral Resolution
|
0.8nm / pixel
|
|
Luminance Range
|
0.05 fL to 45,000 fL
|
|
Luminance Repeatability
|
≤ 1 %
|
|
Chromaticity Accuracy
|
+- 0.0015 x,y
|
|
Chromaticity Repeatability
|
0.0005 x,y
|
|
Polarization Error
|
≤ 0.5%
|
|
Digital Resolution
|
16 bits
|
|
Custom Synchronization
|
10 - 10,000 Hz
|
|
Exposure Time Range
|
0.04 to 30 seconds
|
|
Power Requirements
|
5V, 120 mA, (600mW) via USB 2.0
|
|
Interface
|
USB 2.0
|
|
Weight / Mass
|
2.5 pound (1.134 kg)
|
CR-100 Specifications
|
Wavelength Range
|
380 - 780 nm
|
|
Luminance Range
|
0.0002 fL to 1500 fL
0.0002 fL @ Signal to Noise Ratio > 10, 20 seconds exposure
0.001 fL @ Signal to Noise Ratio > 10, 0.5 second exposure
0.001 fL @ Signal to Noise Ratio > 100, 20 seconds exposure
1500 fL @ Signal to Noise Ratio > 8000, 1 second exposure
|
|
Luminance Accuracy
|
� 2 % @ 0.1 fL, 0.4 second exposure
|
|
Luminance Repeatability
|
0.2 % @ 0.1 fL, 0.4 second exposure
1.5 % @ 0.01 fL, 0.5 second exposure
1.5 % @ 0.001 fL, 20 seconds exposure
|
|
Chromaticity Accuracy
|
� 0.0015 x, y @ 0.1 fL, 0.4 second exposure
� 0.0015 x, y @ 0.02 fL, 20 seconds exposure
|
|
Chromaticity Repeatability
|
0.0005 x, y @ 0.1 fL, 0.4 second exposure
0.0005 x, y @ 0.02 fL, 20 seconds exposure
|
|
Polarization Error
|
≤ 0.1 %
|
|
Synchronization Frequencies
|
10 - 500 Hz (Custom Synchronization from 10 Hz to 10 KHz available)
|
|
Exposure Time Range
|
1 ms to 20 seconds
|
|
Power Requirements
|
5V, 120 mA (600 mW) via USB 2.0
|
|
Interface
|
USB 2.0, Ethernet
|
|
Weight / Mass
|
12oz. (0.34 Kg.)
|
|
|
|
 |
|
 |
| Accessories for this product |
|
|
|
|
