|
|
|
|
This listing is for a 1 week rental of the Colorimetry Research CR-100 colorimeter.
The CR-100 Colorimeter
The Colorimetry Research CR-100 is a high quality colorimeter designed specifically to work with virtually any display technology. The CR-100's machined aluminum and steel housing coupled with a completely solid state design ensure excellent durability while keeping the probe incredibly compact and lightweight (just 12 ounces / 340 grams). What sets the CR-100 apart from other colorimeters are its high quality tristimulus filters. Every CR-100 goes through a strict quality control process including measurement of every tristimulus filter with a double monochromator to ensure the following performance benchmarks are attained:
|
Guaranteed
|
Typical
|
Y (Photopic)
|
≤ 2.0%
|
1.4 - 1.8%
|
Xr (Red)
|
≤ 3.0%
|
2.3 - 2.7%
|
Xb (Red under Blue)
|
≤ 1.2%
|
0.8 - 1.0%
|
Z (Blue)
|
≤ 3.5%
|
2.2 - 2.7%
|
The CR-100 can be used with the CRI Application for manual measurement and logging. It is also compatible with FSI's AutoCal, LightIllusion's LightSpace CMS*, LightIllusion's ColourSpace*, and Portrait Display's CalMan allowing for full 3D LUT based calibration of Flanders Scientific monitors.
CR-100 Specifications
Wavelength Range
|
380 - 780 nm
|
Luminance Range
|
0.0002 fL to 1500 fL
0.0002 fL @ Signal to Noise Ratio > 10, 20 seconds exposure
0.001 fL @ Signal to Noise Ratio > 10, 0.5 second exposure
0.001 fL @ Signal to Noise Ratio > 100, 20 seconds exposure
1500 fL @ Signal to Noise Ratio > 8000, 1 second exposure
|
Luminance Accuracy
|
� 2 % @ 0.1 fL, 0.4 second exposure
|
Luminance Repeatability
|
0.2 % @ 0.1 fL, 0.4 second exposure
1.5 % @ 0.01 fL, 0.5 second exposure
1.5 % @ 0.001 fL, 20 seconds exposure
|
Chromaticity Accuracy
|
� 0.0015 x, y @ 0.1 fL, 0.4 second exposure
� 0.0015 x, y @ 0.02 fL, 20 seconds exposure
|
Chromaticity Repeatability
|
0.0005 x, y @ 0.1 fL, 0.4 second exposure
0.0005 x, y @ 0.02 fL, 20 seconds exposure
|
Polarization Error
|
≤ 0.1 %
|
Synchronization Frequencies
|
10 - 500 Hz (Custom Synchronization from 10 Hz to 10 KHz available)
|
Exposure Time Range
|
1 ms to 20 seconds
|
Power Requirements
|
5V, 120 mA (600 mW) via USB 2.0
|
Interface
|
USB 2.0, Ethernet
|
Weight / Mass
|
12oz. (0.34 Kg.)
|
|
|
|
|
|
|
Accessories for this product |
|
|
|