This Wi-Fi to ethernet adapter allows you to easily connect ethernet equipped FSI monitors to wireless networks supporting push button Wi-Fi Protected Setup (WPS). The adapter is compatible with 802.11b/g/n networks. This package comes equipped with the following:

• 1 x Universal Wi-Fi Adapter

• 1 x USB Power Cable

• 1 x Power Adapter

• 1 x Ethernet Cable

For Remote Control
The Wi-Fi to ethernet adapter is an effective way to establish wireless connection* to AM, BM, CM, and DM series monitors for remote control of the monitor using the IP based remote control software, available in beta for free here: http://www.flandersscientific.com/index/MNCP.php

For On Set Color Management
Use this adapter with the DM250, DM240, or DM170 to wirelessly* send LUT updates and other data to/from programs like Pomfort's LiveGrade Pro or LiveGrade Air.

Power directly from DM250, DM240, or DM170
When used with the DM250, DM240, or DM170 this Wi-Fi adapter can be powered directly from the monitor's USB port. For use with other monitor models the supplied AC power adapter can be used.


*Adapter and computer must be connected to the same WPS enabled wireless network. Ad Hoc wireless connection is not supported. However, direct connection to computer without a router is possible using wired LAN connection.

Wireless adapter setup instructions can be found here: http://flandersscientific.com/index/uploads/WirelessAdapterSetup.pdf